1 / 1
Jug plaster mold
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
This is a single-use mold, once printed it must be filled with plaster and left to dry.
After 24 hours it must be placed in the microwave every 30 seconds to soften the plastic and remove it. Once ready the pieces fit together perfectly to have a 4-piece mold so the piece can be easily removed.
- infill: 0%
- Adaptive layers: yes
- supports:
- type: tree
- placement: touching buildplate
- stop at layer 314
After stopping at layer 314, stop printing and remove from the buildplate. The mold will be ready to be filled with plaster.
To give a smooth finish you can sand it with 1000 grit sandpaper and a little water to smooth out any imperfections.