1 / 3
SV08 Spool Adaptor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This moves the spool on the stock SV08 over top of the machine, so it doesn't stick out into the room
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 95
- Wydruki
- 2
- Wyświetlenia
- 665
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (21)Powiązane
The stock spool holder for the SV08 sticks out quite far into the room. This adaptor shifts it by 45 degrees so it is over the top of the printer, instead. No supports are needed, and I printed this in PETG with 75% infill. You will require 2 more M4 bolts.
