1 / 1
Remix of Sven Brähmer’s awesome, fully tunable phone mount for telescope eyepieces
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of Sven Brähmer’s "Telescope to Phone Adapter (Over-Engineered)".
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 352
- Wydruki
- 4
- Wyświetlenia
- 1574
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 4) (Komentarze: 12)Remiksy (1)Kolekcje (74)Powiązane
A remix of Sven Brähmer’s Telescope to Phone Adapter (Over-Engineered). Sven's model is awesome, as it allows for fine tuning of each degree of freedom associated with attaching a phone to an eyepiece. I found that my phone shifted in the “x” (vertical) direction as the phone clamp does not support the phone in what the OP calls the “x axis” (i.e., it can freely slide up and down in the phone clamp).
Print options tested on a Bambu P1S: PLA, 0.4 mm nozzle; 0.2 mm vertical.
