Anycubic Kobra 3 TPU Isolation Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dampens noise and vibrations pretty well in my testing (Polyflex TPU95).
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 484
- Wydruki
- 3
- Wyświetlenia
- 1797
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
My printer sits on a mostly empty entertainment console and vibrates the thing like a drum. I saw this model on ALL3DP's suggested TPU prints list and gave it a go. This does not replace the printer's feet - they just sit securely in the recess.
It provides decent damping and movement isolation. I don't have a decibel meter but I'm getting significantly less bass resonance from my cabinet, and I can no longer feel the printer through my desk chair across the room.
It's also a solid movement-free base even with the 25mm lift. I have not tested on any prints taller than about 80mm yet. Use at your own risk.
Recommend supporting the recess.