1 / 3
iFlight Nazgul 5 Evoque Walksnail Antenna mount remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual antenna mount for antennas with 4mm stalks
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Printing:
- TPU
- 10% infill
- Layers: 0.2 or whatever you want.
- Paint supports onto the antenna sleeves
Usage:
There's two parts. The small part is on the bottom, and larger part on top.
You can either thread the antenna cables through the holes, or do what I did and cut slots in the bottom of both sleeves.
Zip tie the antenna stalks in place.
You should look at relocating the GPS to the front. Walksnail creates significant RF interference that reduces GPS performance.
Look at my GPS Relocation mod. It's easy :)
https://www.printables.com/model/1148005-gps-front-relocation-iflight-nazgul-v5-evoque