Bookmark: Skeletons reading books
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the first in my series of 'Set of 4 bookmarks'. #1 Four Skeletons reading books
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
This is a first in my series of themed bookmarks. I plan to do more such ‘set of 4’ bookmarks themed around books.
#1 Skeletons reading books is a metaphor on three aspects of life, however you want to see it:
- lifelong learning
- ‘buried under’ books
- Reading your own biography from the afterlife.
PRINT INSTRUCTIONS:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 240x129.3mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 3mm and the Actual Depth is 3mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.3
PLA Generic White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #16 (1.4mm) swap to White for the rest.