1 / 6
Info-Orbs Desk Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the Info-Orbs dev kit by BrettDotTech
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 115
- Wydruki
- 4
- Wyświetlenia
- 532
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 4) (Komentarze: 10)Remiksy (0)Kolekcje (12)Powiązane
Case for Info-Orbs kit, designed to be used with the LCD displays placed horizontally and with headers on the PCB,
This case has different options to add more accessibility when assembled.
- Case with access cutout for 2 different options;
1 - Panel cutout to be used with included USB C breakout for power only.
2 - Panel cutout with buttons for RST and Boot and also USB cable connection to the ESP32 board.
- Case fully enclosed to be used with the USB C breakout for power only.
Parts required-
5 to 9 - M3 x 8/6mm Flat/Countersunk Head Socket Screws
2 - M3 x 8/6mm Socket/Rounded Head Screws
7 to 11 - M3 x 4mm Threaded Inserts
Preparations-
Assemble the Dev kit with the displays placed horizontally and using headers on the PCB
Instructions for case front-
- Install the Spacer on the Displays.
- Insert the Buttons on the Case Front
- Place the Spacer/Displays on the Case Front (try to not force it or that might damage the screens)
- Use the clips to secure the Spacer/Displays to the Case Front
- Use screws to secure the PCB