1 / 6
Jig for 12mm LEDs in 2" x 2" x 1/16" Aluminum Angle 6063-T5
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple jig for 12mm LEDs spaced 3" apart on a 2" x 2" x 1/16" Aluminum Angle 6063.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple jig for 12mm LEDs spaced 3" apart on a 2" x 2" x 1/16" Aluminum Angle 6063.
The drill hole is 13mm and the catch numb is 11mm. This should give you enough room to drill without coring the plastic. The nub is a bit smaller to allow to burrs and stuff.
Updated:
Added version 4 that has a lower profile edge and an insert for a flange bearing available at https://www.amazon.com/dp/B0CGDWDSPJ
