SF Practice Chux
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Stereo Freq practice chux for chuckin-off!
Print the sticks on an angle about 30 degrees off the build plate, from corner to corner, so it will fit.
The threads are a bit tight fresh off the printer. I recommend wearing some gloves and working it back and forth to get it to give a little, so that it can thread all the way.
Assembery:
1) Put the washers on the male end of each threaded plug
2) Tie a knot at the end of some 550 cord
3) Feed the other end through the bottom of one of the plugs, so the knot seats in the opening
4) Feed the cord through the wide (threaded) end of one of the sticks and screw them together
5) Feed the cord through the narrow (non-threaded) end of the other stick
6) Feed the cord through the inside eyelet of the other end plug and screw them together
7) Tie another knot on the end of the cord at the desired length