Suction Grip for glazing (Vacuum Cleaner Attachment)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
use your vacuum cleaner as a gripping tool for glazing
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 726
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple but effective suction adapter. No cleaning up glazing tongs marks :)
I glazed bisque fired pieces, no wax on the bottom. Works in a similar way as dent puller does for glazing.
Just turn your hoover on and the cup attaches, then you can break the seal by grabbing the cup from the inside or just turning off the hoover.
The seal is a 8mm round foam which I just cut to size and joined to made a circle with CA glue.
The main model is made to fit 35mm hose, I have a Karcher SE4001 vacuum.
This .3mf is made to be adjusted to fit your vacuum hose. Simply open the .3mf in prusa slicer and adjust the size to your hose !