1 / 1
Inner Radius Gauge / Fillet Gauge 1mm - 20mm with stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of 5 square gauges with 4 different radiuses each
- Ocena
- 4,875 / 5
- Polubienia
- 39
- Pobrania
- 238
- Wydruki
- 9
- Wyświetlenia
- 883
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 9) (Komentarze: 9)Remiksy (2)Kolekcje (74)Powiązane
These 5 gauges let you measure radiuses from 1 to 20mm.
PLA with 0.2mm layer height will be fine, you may want to use two different colors, so a different one for the values. I recommend a light color for the fillets.
This was created with OpenSCAD, source code ist attached