YubiKey 5C NFC Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect the usb port on your YubiKey 5C NFC
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 267
- Wydruki
- 2
- Wyświetlenia
- 2813
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Very simple cover I made to protect the type c connector on my Yubikey 5C. Its designed to be printed in spiral vase mode at a layer height of 0.2mm, with 3 base layers. I used PETG and the fit is perfect, I do not think PLA will work as it will probably deform over time. Also you might have to flip the model 180 degrees to have the bottom solid instead of the top.
TIP: Mess around with your fan settings for a stronger print, 30% on the prusa mini seems to be perfect at 250c print temp. Below that it melts and is too tight, above that it is more brittle and separates easier on the layer lines.