1 / 2
Earbud/headphone Shirt Clip (for cabel allowed to move back and forth in the clip) — zdjęcie 1
1 / 2

Earbud/headphone Shirt Clip (for cabel allowed to move back and forth in the clip)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,10 € – 0,13 € netto (bez VAT)

Dla pliku: Earbud_Clip(-0.2mm)_remix_0.2mm_PETG_MK3S_9m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,12 € netto (środek widełek).

Masa podana przez autora
1 g
Czas druku podany przez autora
8,4 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Clip to keep headphone wires bouncing around - remixed. Cable can move inside.

Ocena
4,5 / 5
Polubienia
34
Pobrania
507
Wydruki
3
Wyświetlenia
1487
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial

I needed this remix for my wife :) She hated cable position being clipped without a chance to move (as it is tighten in the original from Ben G. [thanks for the design!])

 

So here:

  • the cable is going inside, where the t-shirt is being clipped aswell.
  • the cable can move inside it - allowing better movement of the head
  • I have added also more inner tighten small parts on request - to better grip the t-shirt and securing the cable inside

 

More suitable for:

  • when you need cable to actually move back and forth
  • like for wireless buds, which are connected with cable around the neck

 

Tagi