1 / 1
Picture-Hanging Keyhole Template
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A router template for creating keyhole slots.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- BSD License
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (28)Powiązane
This router template may be used to create short and long keyhole slots for picture frames. It is meant to be used with a 3/8" keyhole router bit (such as the Freud 70-104 or Rockler 92024) and a 5/8" short shank template guide bushing.
This model is parametric and can be customized with OpenSCAD to produce slots of any length.
Instructions
- Use double-sided adhesive to secure the template.
- Lower the router bit so that cuts a keyhole in the middle of your workpiece (approximately 7/16" beneath the template for ¾" stock)
- Align the guide bushing into the template and begin routing.
Notes
- It is beneficial to use dust extraction when routing the keyhole slot since sawdust is not easily ejected from within the slot during routing.
- A pilot hole may be drilled with a 3/8" or 10mm Forstner bit prior to routing the keyhole slot. Doing so reduces the amount of work performed by the router and allows the router to be more easily used with a fixed base instead of a plunge base.