IKEA Symfonisk Gen2 Buttons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement buttons for the IKEA symfonisk remote Gen2
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
The IKEA SYMFONISK remote is a great multifunctional zigbee remote for Homeassistant / Zigbee2MQTT. You can directly bind buttons to lights (on/off, level) or use buttons in Homeassistant for any other criteria.
Replacement Process
To better represent these functions, I designed replacement buttons, similar to my RODRET / SOMRIG replacement faceplate.
Buttons are just glued on and can be seperated with moderate force. My suggestion is replacing them one by one to aid in alignment. The +/- buttons seem a little bit more unstable, so I suggest starting with the minus and center buttons and then working your way around.
Please keep in mind, that the outer corners will be slightly higher than with stock buttons. This is due to the restrictions when printing face-down.
Slicing / Printing
You can reuse the prepared 3mf files with negative volume or MMU modifiers for your own symbols.
Homeassistant icons: Material Design Icons
Corrdinates used for symbols:
- x = +/- 12
- y = -1
Size in Example: 7mm
Setup in the preview
My remote is set up the following way:
- Center: On/Off (z2m bind)
- Volume Up/Down: Brightness (z2m bind)
- Back: Scene “100% brightness, both lights”
- Forward: Scene “20% brightness light 1, light 2 off”
- Shortcut 1: Prusa 3D printer (click: on, hold: off, double click: auto off)
- Shortcut 2: Toggle Workbench light