1 / 5
filament stand and filament guide Ender 3 V3 KE — zdjęcie 1
1 / 5

filament stand and filament guide Ender 3 V3 KE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

filament stand and filament guide for Ender 3 V3 KE

Ocena
0 / 5
Polubienia
25
Pobrania
134
Wydruki
0
Wyświetlenia
1201
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Disclaimer: I am uploading the models of the filament stand and filament guide at the request of the guys from Reddit. I made them for myself, so I did not waste time on order and beauty in the files.

A few comments on these files: 

1. The white pads on the filament stand are simply glued as are the two halves of the stand, I used the most standard bearings for roller skates called 700 something z. 

2. In the part that replaces the standard sensor holder, I inserted a heated insert, so if you do not have one, find another way to secure the sensor cover. 

3. The sensor cover is printed on the front side and with supports, snaps into place without the need to tighten. If there is a big demand for these models, I can tidy up the files and take beautiful photos. Do not forget to adapt the diameter of the holes in the parts to your filament guide tube

 

also fill free to modify files any way you want and ask me if you need something

Tagi