1 / 9
Lathe thread dial - remix for Bernardo Hobby 500
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits Bernardo Hobby 500adapted gear to work with M12x3 worm screw
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a remix from https://www.thingiverse.com/thing:4288111
Fits Bernardo Hobby 500
- adapted gear to work with M12x3 worm screw - print with no supports
- adapted top cap to not colide with screw cover - print with no supports
- created dedicated holder - limited supports as shown on picture
- modified dial disk for better digits visibility - print with two colours - changing filament at 3mm height or just paint the digits
- Body 1 (bottom) copied from Lathe thread dial by Kswiorek - no supports M8x50 screw and two cheap 608z bearings
Top part is shorten to not colide with metal screw cover on a lathe. To fix it to the lathe unscrew M12 nut (no risk, this nut is a lock and may be loosen), put the holder with dial and screw back.
Thanks to Kswiorek for original project and sharing source files to make remixing easy.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
No
Supports:
Yes
0.2
Infill:
20%
Notes:
Any material does the trick.
Category: Machine Tools