BetaFPV Pavo20 Pro mount for DJI O4 Air Unit Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for DJI O4 Air Unit Pro for the Pavo20 Pro. VTX mount and camera canopy for The DJI O4 Pro specific for BetaFPV
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 282
- Wydruki
- 0
- Wyświetlenia
- 2211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Mount for DJI O4 Air Unit Pro for the Pavo20 Pro.
VTX mount and camera canopy for The DJI O4 Pro specific for BetaFPV Pavo20. The canopy is designed for Heat set thread inserts (for use with the OEM screws), but it is also designed to allow the use of m2x16 screws with out the inserts (use this setup at your own risk)
Recommend printing in a hi-temp filament because the O4 AU can reach hi-temps if left sitting with no airflow.
TPU is not recommended.
Parts required: 4 m2x3 Heat set nuts or 4 m2x16 screws