Sennheiser G4 Transmitter Mic Stand Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach the Sennheiser SR-IEM-G4 transmitter to a microphone stand!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
For the rare use case that you don't wish to rack mount these! I am planning on using this with an in-ear controller attached on top of the transmitter. That way cable runs can be kept short, instead of having the controller on the mic stand, and this on the floor somewhere nearby.
Fits a standard 5/8" mic stand, be careful when screwing it on though! The transmitter is heavy and if the threads are not aligned it will sit crooked. I tried to see if there was an easy way to insert some metal threads, but I could not find a way that did not involve buying some adapter and trimming off a part of it, so printed threads it is.
Edit: Perhaps you could interference fit a 5/8" hex nut instead? I have not tried that, but it would probably work better than the 3D printed threads.
---
Update 07/15/2026
Been going strong, but we did get it to break! We were swapping keyboards out for a visiting musician and they accidentally bumped it and snapped the threaded mount off. I resolved this with another print that beefed up the fillet on the threaded part by an absurd amount - included in the files! I made the file back in August of 2025, but forgot to upload it 😶
---
Required Materials:
4x: 3x8mm flat head screws
---