1 / 1
HSW Allen/Hex key Holder - 1.5 to 6mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HSW compatible Allen key Holder - from 1.5 to 6mm
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 156
- Wydruki
- 5
- Wyświetlenia
- 413
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 5) (Komentarze: 5)Remiksy (0)Kolekcje (29)Powiązane
This is an hex key holder for the HSW system by RostaP !
Dimensions
It is compatible with allen key from 1.5 to 6mm (1.5/2/2.5/3/4/5/6)
Printing
There is suffisant play everywhere so you don't have to scale anything.
It can be printed without support and is direcly in the good orientation for printing.
Mounting
It need 2 “empty insert” from RostaP to be mounted.
Comments
If other sizes are needed you can write me directly !