1 / 3
Qidi Q1 Pro Improved Visibility Duct - Remix — zdjęcie 1
1 / 3

Qidi Q1 Pro Improved Visibility Duct - Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed design with better tolerances, slightly refined pathways and printed at an angle for better results.

Ocena
5 / 5
Polubienia
46
Pobrania
257
Wydruki
3
Wyświetlenia
1297
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

An improved and refined version of the original design by Chaz. I used the 360° part cooler duct by 8jack as a reference for better tolerances and making it easier to print the duct. I also added a bump to “lock” it into place via the fan and slightly refined the inner surface with fillets.

This is to be printed at a 45° angle. Print this out of ASA, ABS or whatever heat resistant filament you can. It's good to print as is without supports. You could add one for the area where the duct splits as shown in the third picture but it is not needed IMO.

Tagi