Prusa XL Powered Filament Inserter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you're sick of manually pushing filament into the Prusa XL PTFE Tubes this upgrade is for you!
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 567
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Part files linked include original Solidworks models + step files for loading directly into the slicer, anything that doesn't list a qty to print requires one copy. In addition you'll need a bunch of M3 bolts, full disclosure I didn't measure which lengths I used, as long as they don't bottom out you're good. The CAD is all set up for the left hand side inserter, to make one of the right hand side you'll need to mirror the Offset Support, Offset Support Bottom and Base v2. Everything else can be printed as is for the right hand side..
Parts you'll need to purchase
- M3 Bolts
- 5x Hobb Goblin https://e3d-online.com/products/hobb-goblin-5mm-id-drive-gear
- 4x M3 Extrusion Nuts https://a.co/d/2lQzK9q
- 2x Motor https://a.co/d/8031tj6
- 2x Switches https://a.co/d/542iRdd
- 1x 24V DC PSU https://a.co/d/cjfApue
- Some PTFE tubing https://a.co/d/5gCCMMJ
- 2x Shaft Couplers https://a.co/d/en2OSzP
- 12x 22x7mm bearings https://www.mcmaster.com/catalog/131/1420/5972K91
- 2x Shafts https://www.mcmaster.com/catalog/131/1375/1327K51