E3D Volcano BLTouch Extension Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Do you have a favorite BL Touch mount, but it doesn't work because it was designed for a standard tip, but you have a volcano tip? This extension will space the BL Touch down by 9 mm and is the same profile as the BL Touch, so it should work with most mounts. The screws that come with the BL Touch are a bit short for the distance required, so this was designed to use M3 screws. I've found around 16-18mm is a good length, but it could vary based on the thickness of the mounting plate for your BL Touch mount.
The idea behind this was to create a part that could be used universally with many mounts so that there didn't need to be a volcano version of every mount making it easier for both designers and people printing this off.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
No
0.20
Infill:
20
Filament:
Prusament PETG
Notes:
I printed this in PETG, but you can use whatever works for you.
Category: 3D Printer Accessories