Airsoft Tracer Energy Saver (Acetech and similiar)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevent your "Shake and Wake" tracer to leave the deep sleep mode by accident.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
To put an Acetech Tracer with "Shake and Wake" into deep sleep mode, you have to put something in it, wait for five beep sequences and then carefully lay somewhere. What happens if you bump into the tracer or move your gear bag or whatever? Yep, Tracer wakes up. Great. Let's play with an empty Tracer. To prevent this scenario I made a simple transport lock. Just screw it in the Tracer and every time that thing wakes up, it will be put to sleep instantly again. In case you used more force than necessary to screw it tight or it breaks apart: grap a 4mm Allen key and you are fine :)
This was specifically designed for the Acetech Brighter C but might fit other Tracers, too. The thread is the usual M14 x 1 LH.
Print Settings
Printer Brand: Bambu Lab
Printer: Bambu P1S
Rafts: No
Supports: No
Resolution: 0.12
Infill: 0.20