Saber-toothed Cat (Smilodon Fatalis) Skull (Life Size)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a life-size model of a Saber-Toothed Cat Skull
- Ocena
- 5 / 5
- Polubienia
- 179
- Pobrania
- 773
- Wydruki
- 3
- Wyświetlenia
- 3571
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
This is a life-sized Saber-toothed cat skull. The model came from Sketchfab, and is the scan of a cast of a real fossil. I took the model and separated the mandible and cranium, then split each of them into two pieces for easier printing. I have included the original files if you want to split them yourself (like to fit a smaller printer - I used a printer in the 300mm class) or redesign the pieces to snap together with pegs or something. I printed in PLA with .4 nozzle and .2 layer height, lightning infill, 2-3 walls, and tree supports. I made the model almost completely hollow but definitely go for more serious infill if you intend the finished model to be handled (like by students). Also consider using adaptive layer height to make the print look smoother - I did use this on the top of the skull and it seemed to help. I super-glued the parts together and basically stir-welded the seams with a 3D pen. I then applied two coats of white latex paint+primer followed by a coat of Minwax Golden Oak wood stain. While the stain was still sticky I rubbed the teeth with a rag to make them stand out. I hot glued the lower jaw to the skull, then hot glued the skull to a metal rod that I anchored to a piece of limestone.