16x2 character display enclosure with I2C (Fischertechnik and standalone)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 2020-04-21: I made a better 16x2 I2C display here: https://www.thingiverse.com/thing:4301853 Changelog:…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 633
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2020-04-21: I made a better 16x2 I2C display here: https://www.thingiverse.com/thing:4301853
Changelog:
2018-10-30: added standalone version without fischertechnik connectors; changed name accordingly
A simple enclosure for this kind of 16x2 hd44780 display (others may fit or not) with I2C interface attached at the backside with connectors for the fischertechnik construction toy system.
To be able to change the I2C address without opening the enclosure, you can optionally add a 4xDIP switch (see images for exact placement). As only 3 switches are needed for the address, you could even use the fourth for a back light switch, I chose mine to be always on, so I just removed the jumper and bridged the two male pins on the I2C board.
I use it with the LiquidCrystal library for Arduinos.
See it in action in this video: https://youtu.be/MyCck4btWzE
Please consider leaving a "like" or posting your make as a token of appreciation for my work.
Find my other fischertechnik designs here.
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
.2 mm
Infill:
15 %
Category: Construction Toys