Bigger loom inlets - Woodpecker GRBL CNC machine PCB board enclosure/box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very quick remix of @Saur0n's nice woodpecker case:https://www.thingiverse.com/thing:2781593The original has…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a very quick remix of @Saur0n's nice woodpecker case: https://www.thingiverse.com/thing:2781593
The original has served me well but I was rebuilding/upgrading and needed some better access for all the additional wiring I threw at it. So I knocked this up based on the thicker walled case model.
Done with OpenSCAD, I import the case, then subtract two sections of the end wall to make the upper loom inlet bigger, and add a second one for neater access to the limit+control pins.
Printed and fitted I was very happy, but no final pictures due to my probe pin having an argument with the 24v rail and the atmega (gently) exploding on the woodpecker card. Humm. So this was designed and printed, and good. But I need to do some smd soldering+bootloading before it sees any use.
Category: Machine Tools