SEPA TFB45A 45mm radial fan model for mockups
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Useful for fitting parts; details taken from the data sheet; mount points and fan mouth correctly positioned.Note;…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Useful for fitting parts; details taken from the data sheet; mount points and fan mouth correctly positioned.
Note; this is a 45x42x18.5mm fan... not the 4020 size often found in printer supply shops.
I'd gone through a bunch of cheap 4020 and 5015 fans and wanted something with proper bearings for the part coolers; I found these at a local big electronics supplier; proper ball bearings; Japanese engineering. More airflow, less noise, longer life. Perfect.
I created this model for my own use in redesigning the ducts on my part cooler for them; https://www.thingiverse.com/thing:3040303
Category: Parts
