165mm car speaker pod mount for boats, RV's etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy printing freestanding pods designed to mount a 165mm car speakers in my boat.I might add grills later, but for…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 679
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Easy printing freestanding pods designed to mount a 165mm car speakers in my boat.
I might add grills later, but for now this looks good with the fancy speaker internals on display.
Use stubby self-tap screws for the speaker mounting, the oval holes in the pod rim are for this. The other holes for sound and style, plus a discreet hole with good access for the cables. There are two 5mm mount holes 25mm apart underneath the base, with a 10mm dia. recess for nuts/screws/washers.
Print as orientated in the STL, no supports needed. I used a translucent filament which gives a nice (to me, anyway..) crazy effect from the infill.
SCAD file included, but not parameterizd for speaker sizes.. sorry :-O
PS: The Car Stereo/Radio holder in the photos is from here: https://www.thingiverse.com/thing:1498900
Print Settings
Printer:
K280
Rafts:
Doesn't Matter
No
Resolution:
0.2
10%
Category: Sport & Outdoors
