K280 Korners (for 310mm bed and 360mm extrusion Kossel deltas)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple corner infill plates for any Kossel with a 310mm bed and 360mm extrusions on the vertices. Designed for my HE3D…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 61
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple corner infill plates for any Kossel with a 310mm bed and 360mm extrusions on the vertices. Designed for my HE3D K280.
My bed is about 1cm above the frame rails, so this matches that level. Underneath there is a large cutout running from the vertical rail to the plate to allow cable routing as needed, etc.
Otherwise nice and simple; and yeah! my printer is a bit purple..
SCAD included, parameterized for bed height.
Print Settings
Printer:
HE3D K280
Resolution:
0.2
15pct
Notes:
Should print easily upside down as oriented in the stl.
Category: 3D Printer Parts
