RF100 heavy spool hub adapter thing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps a large filament spool (with a 53mm central hole, 60mm deep) spin smoothly on the RF100 standard spool holder. A…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Helps a large filament spool (with a 53mm central hole, 60mm deep) spin smoothly on the RF100 standard spool holder.
- A 1kg filament spool I have has a rough spindle hole and was snagging once every revolution, producing regular skipped extrusion/weak layers/horribleness in my prints.
Outer diameter is 50mm, inner is 36mm, and it is 70mm long (slips easily and securely over the standard RF100 spool holder pin). The flange is 60mm diameter and 5mm deep, allowing for a spool hub width up to 65mm. It was designed with a specific spool in mind, but should work with many others.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/c7F1nUFlQYJ
Print Settings
Printer:
RF100
Rafts:
Doesn't Matter
Doesn't Matter
Resolution:
Draft
15pct
Notes:
It's OK to print this supportless and fast, low res. I did, and it works well.
Category: 3D Printing