Fixed Jung CD500 frames for Shelly Wall Switch. Incl. 4 segment frame.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixed Jung CD500 frames for Shelly Wall Switch. Incl. 4 segment frame. The original version was a little to short to fit
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 506
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Original: https://www.printables.com/model/824217-shelly-wall-switch-adapter-for-jung-cd500-with-com
The original multi segment frames did not quite fit. While the 2 segment version was just a little tight, the 3 segment version did not fit anymore, because it was 2.4mm too short.
I made the separators between the segments a little wider (2.5mm instead of 1.2mm) to fix this and also added a 4 segment version.
I took the tripple-frame, cut one end off and mirrored the rest to get the 4-segment version. Unfortunately this is a little too long to fit on the buildplate of a Bambulab P1S even if rotated and placed carefully. I therefore cut it in OrcaSlicer and used triangular dowels for alignment. Don't make the mistake to cut it right on a segment divider as that is the most visible way of doing it.