Amiga 4000 HD Floppy Bracket with Passthrough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A4000D Hard drive / floppy bay bracket with passthrough for SD card extender cable
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Amiga 4000D HD/Floppy/Gotek Bracket with passthrough for SD card extender.
Currently building A4000D with z3660 accelerator and wanted to have sd card easily accessible from the front panel. Unfortunately original bracket is closed from the sides and no way to route extender cable through it (can't exceed 150-200mm cable length).
There is this LinuxJedi's version but it needed few tweaks, so I made completely new design. https://www.thingiverse.com/thing:6149663
Improvements are: Sturdier, added front scew holes for bottom 3.5" bay, made room for keyboard lock cylinder, passthrough for flat cable and this can be printed without any supports.
Nothing special when printing, print as in picture and if you want, you can enable supports for cleaner front screw holes but not mandatory.
Fusion 360 file included (…sorry, my second design ever with Fusion).
17.1.2025: Uploaded updated model, little more slack to left side so cable routing will be less Tetris.
18.1.2025: In this new version I added similar passthrough to upper 3.5" bay and also added front screw holes to that bay also. Refined lower front screw holes.