fischertechnik mini motor replacement gears
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The fischertechnik mini motor comes with a pinion and gear adapter. Unfortunately, the smaller Z11 gears of this…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 552
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The fischertechnik mini motor comes with a pinion and gear adapter. Unfortunately, the smaller Z11 gears of this adapter are prone to break sooner or later. Proper replacements can be ordered e.g. from the great fischerfriendsman.de site, but I was curious if you could also print them. My tests came out fully functional, but I wouldn't want to bet on their durability.
Hint: One of the gears in my images is an original from ft. ;-)
Please consider leaving a "like" as a token of appreciation for my work.
Find my other fischertechnik designs here.
Print Settings
Printer:
Anet A8
Rafts:
No
No
Resolution:
.1 mm
100%
Notes:
A perfect first layer helps to keep friction at a minimum.
You might want to use a 2mm drill before installation to ensure that the gear fits on its axle. If your first layer is not perfect, as in some of my samples, use a small file to remove any excess material between the teeth.
See ft:pedia 4/2011 pp. 23-25 for instructions on how to (dis)assemble the pinion and gear adapter.
Category: Construction Toys