1 / 5
Multi-Directional Roller Stand Wheel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Roller wheel for stands enabling movement in two directions with mini rollers suspended on standard PTFE tube
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Key Features
- Two-Directional Movement: Allows smooth forward-backward and sideways motion.
- Mini Rollers Design: Uses 12 rollers for multidirectional support and reduced friction.
- Material Recommendations: Print rollers with TPU or grippy material; wheel halves and pins in rigid material.
- PTFE Tube Integration: 4mm PTFE tubes provide stability for rollers, reinforced with a central pin.
- Precision Cutter Tool: Helps cut PTFE tubes to the perfect length effortlessly.
Printing Instructions
- Mini Rollers: Print with TPU or a flexible, grippy material for best performance.
- Wheel Halves & Pins: Use PLA, PETG, or other rigid materials for durability.
- Cutting Tool: Print in rigid material for precise PTFE tube cutting.
- General Settings:
- No supports required.
- Layer height: 0.2mm recommended.
- Infill: 15-20% for rollers; 25-30% for other parts.
Assembly Instructions
- Cut the PTFE tube pieces to the required length (28mm using the included cutting tool.
- Insert a central pin into each tube for reinforcement
- Take it out of the cutting tool and repeat for 12 times.
- Assemble mini rollers onto the designated slots in one of the wheel halves.
- Join the two halves securely with the center screw, make sure the positioning pin of the wheel halves are aligned.