1 / 1
Ambi safety lever for Ruger PC Carbine — zdjęcie 1

Ambi safety lever for Ruger PC Carbine

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replace the cross-pin with an ambi lever.

Ocena
5 / 5
Polubienia
3
Pobrania
36
Wydruki
0
Wyświetlenia
275
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Use the detent tool https://www.printables.com/model/1150135-safety-detent-tool-for-ruger-pc-carbine-and-22 when removing the cross-pin or you will have to use it later to re-install the detent and spring (and there is a very real risk that you will never find the tiny parts again when they fly off, the spring has plenty of pressure…)

Uses M3x8 cylinder head hex screw from Prusa spares, the it doesn't bit at first use a drill bit to give a bit of cut to the plastic to get started.

new v2 is less likely to go over the fire position but is going to be harder to remove.

 

Link to Fusion design for editing https://a360.co/41q0jdt