1 / 2
Kitchenaid Motor Shaft Seal - Pro Mixer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple model to replace a faulty Kitchenaid Pro motor seal.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
If you don't know, you can replace parts of your Kitchenaid mixer including the metal gears, motor, main board etc. I was replacing some of my gears and noticed that the grease in the gear box had leaked into the motor. I found that the seal had broken. I went to purchase it and realized i could probably make one myself.
This will fit at least the Kitchenaid Pro 6qt mixer. I would assume it would fit any size of the pro mixers. It seals the shaft of the motor to the transmission housing