BMW F10 n55 Intake for AFE Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BMW F10 n55 Intake ducting to be used with a AFE filter
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 980
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
There are not too many Intakes on the market for the BMW F10 535, so I designed my own.
Intake ducting and shield designed to be used with a AFE filter (https://afepower.com/afe-power-21-90061-magnum-flow-pro-dry-s-air-filter). May also fit any intake that has a 7x3 inch oval inlet.
Design is similar to the BMS style open intake. Can be printed with ABS, PA, or PA-CF materials. Supports will be required unless you split then refused the part back together on a diagonal in the bend (this is what I did to have a smoother path inside the ducting).
Also designed a shield that bolts directly in place of the OEM cover. Use lexan or plexi glass (9x8 inch) and silicon to hold it in place. This can be printed with out supports on a 300x300 machine.
I carbon skinned mine for its appearance, but that is not necessary.
Without the shield it has a nice growl above 3k rpm. Intake air temps do not seem too different between the two or the oem set up but I will need to do some more testing during summer time. Typically see ~10-20 degrees F above ambient with a aftermarket g-plus intercooler.