QuinLED PCB Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For QuinLED Dig-Uno and QuinLED Dig-Quad boards
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 106
- Wydruki
- 1
- Wyświetlenia
- 796
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Mounts for...
- QuinLED Dig-Uno ...more info: https://quinled.info/pre-assembled-quinled-dig-uno/
- QuinLED Dig-Quad ...more info: https://quinled.info/pre-assembled-quinled-dig-quad/
- Mean Well RSP-320-5 300W (60A) 5Volt Power Supply
The Dig-Quad/Uno PCB fits over the pegs, then melt the pegs down with a flat soldering iron tip to secure.
Optionally super-glue either mount to the “MW RSP-320-5 Mount Adapter” which clips onto the power supply housing.
Print these in PETG 0.20mm, because when you melt the pegs down, you want them to still be strong. Other option is to cut off the peg with snips, and drill a small hole centered on where the peg was, then insert a M2 screw.
Also compatible with my cover for the QuinLED-Dig-Uno board available here: https://www.printables.com/model/391509-cover-for-quinled-dig-uno