Hue remote mount to single gang decora device
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on Two-Gang Light Switch Plate for Philips Hue Remote, but I only had a single-gang box.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 70
- Wydruki
- 2
- Wyświetlenia
- 764
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is based on Two-Gang Light Switch Plate for Philips Hue Remote
by viettamluu June 06, 2018
https://www.thingiverse.com/thing:2948880
However... this version mounts over a single gang wall box, instead of a two-gang wall box.
Designed to fit as a faceplate over a single decora device (my fireplace control shown in the picture) but this could be a paddle switch, outlet, USB outlet, etc. Want the Hue remote on the other side, simply turn it over!
Includes snap-in holders on the back for 10mm magnets that hold the Hue remote. Use two magnets horizontally for the older Hue remote, or just a single center magnet for the Philips Hue v2 Smart Dimmer Switch. Test correct magnet orientation before mounting to your wall (try flipping magnet around or different snap-in position to achieve a good hold of the remote.