1 / 5
Toyota Highlander Qi charger removal cover — zdjęcie 1
1 / 5

Toyota Highlander Qi charger removal cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made these parts to fill the holes in my 2020 Highlander after removing the Qi charger from the center console.

Ocena
0 / 5
Polubienia
7
Pobrania
27
Wydruki
0
Wyświetlenia
1039
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Made these parts to fill the holes in my 2020 Highlander after removing the Qi charger from the center console.

R part (passenger side) is for the hole left by the spring shaft thing after prying/twisting it out, this covers the damage where the two screws were mounted in the side plastic of the center console. If you actually took your center console apart all the way, and removed the screws correctly (instead of just prying from the inside as I did) then you might need to mod this part to not have the raised clip on the back and instead make two screw holes so the original screws can be used.

L part (drivers side) is to cover the tube that the factory wiring harness comes out of, this connector can be pushed back inside the tube. In my case I added an LED light to the end of the connector hence the half circle piece at the end to let the light out.

 

Tagi