LabRadar Accelerometer Trigger + Picatinny Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for a DIY Accelerometer Trigger for the LabRadar Chronograph Trigger housing has a cylinder for the trigger…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 960
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for a DIY Accelerometer Trigger for the LabRadar Chronograph
Trigger housing has a cylinder for the trigger assembly and a hole for the wire to exit. A velcro strap slot allows for securing mounting without a picatinny rail.
Also included is a picatinny mounting adapter. This mount uses a 2.5mm hex nut, washer, and 25mm long screw. I bought a bulk pack on Amazon from iexcel and had them laying around.
Added Bonus: If you have the JKL Accelerometer trigger already as I do, you can use this as a secure mount as well, as the footprint is identical. The TPU picatinny mount doesn't hold on very well with higher recoil, and this eliminates that issue.
I printed it with PETG, but I assume PLA or PLA+ would be plenty strong enough. The Velcro strap bridge would certainly turn out better with PLA.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.2mm
Infill:
30%
Filament:
Hatchbox PETG Orange
Category: Sport & Outdoors