IKEA Hektar lamp pedestal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It turns what is normally a suspension lamp from IKEA, the Hektar 38cm shade, into an upwards-projecting one.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
The 38cm IKEA Hektar is normally supposed to hang from the ceiling. It can however be mounted as an upwards projector for that nice retro, pseudo-industrial lamp look.
This block holds the lamp upwards, and the original Onshape model can generate slightly different angles via a configuration table.
A small V slot on the back allows nice routing of the power cable.
The recommended upwards angle is 55° in order to shine light against the ceiling and get that buttery smooth illumination, but more aggressive angles can be achieved and are in the list of files below, indicated by the suffix.
Print without supports, PETG for best results. Be wary it might require a large bed for some angles. Center of gravity of the lamp should always be above the pedestal, so it is quite stable.
