1 / 5
Honeycomb Storage Wall Anbernic RG35XXSP Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A HSW mount for the Anbernic RG35XXSP
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This is a Honeycomb Storage Wall mount for the Anbernic RG35XXSP.
There's not much to say about this one, its a simple box that can attach to HSW inserts and holds your handheld securely.
Print Settings
- Support: None
- Filament: (almost) anything
- I use PLA for my HSW, but PETG (or others) should work just fine
- Perimeters: 3
- Because this part is so small and simple, this doesn't really matter…
- Infill: 20% Gyroid
- Because this part is so small and simple, this doesn't really matter…
Source CAD
I used OnShape for this design and you can find the public document here: https://cad.onshape.com/documents/173044606059e276b97713ea/w/827f42702f9ab65838e73a3f/e/f4d7fecfb49b249e4f2299f9?renderMode=0&uiState=678abed00a8a5221d65b114d
Filament Used
- Overture PLA Silk Gold