3/8" MasterCraft Master Socket Gridfinity Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Specific Organizers for My MasterCraft Socket and Tool Sets
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 522
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
These are made for MasterCraft and similar socket sets to fit into my toolbox Gridfinity system. These are the yellow ones in the picture.
I will have more 3/8" sets coming including; Metric Deep and Shallow socket sets. Please keep an eye out for those, my already published ¼" set, and my soon to be made ½" sets.
These socket holders seem to fit Proto, Craftsman, Husky, MasterCraft, and maybe Snap-on (I only had one Snap-on to test)
All text is 4mm in size and raised up by 1mm.
I can only print a 5 wide grid on my printer so I had to split my Torx bits between two models by including my T60 bit at the start of my E-Torx row as I will have the two organizers beside each other.
The MasterCraft Metric Allen Set has sizes; 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, and 12mm
The MasterCraft SAE Allen Set has sizes; 5/32, 3/16, ¼, 5/16, and 3/8. Also hold Philips #'s 1, 2, and 3 as well as Roberts sizes #1 and 2
The MasterCraft Torx Set has sizes; T10, T15, T20, T25, T27, T30, T40, T45, T50, T55, and T60.
The Allen and Torx sockets are a common size and as such will also fit Husky, PowerFist, Proto, Gray, and Snap-On sockets (At least the ones I had to test all fit the width and were a common height as well)
The MasterCraft E-Torx Set has sizes; E7, E8, E10, E11, E12, E14, E16, E18, E20
(Watch out as I accidentally made mine too deep for the sockets, so I just printed some spacers for the bottom of the holes to raise them 15mm)
The MasterCraft/Husky Spark Plugs have sizes; 5/8, ¾,and 13/16
The MasterCraft SAE Shallow sockets have sizes; 3/8, 7/16, ½, 9/16, 5/8, 11/16, and 3/4
The MasterCraft SAE Deep sockets have sizes; 3/8, 7/16, ½, 9/16, 5/8, 11/16, and 3/4
The (Cheap brand from Princess Auto) Bolt/Nut extractors have sizes; 3/8, 7/16, ½, 9/16, and 5/8
MasterCraft Extension lengths are; 252mm, 74.4mm, and 76.4mm. Also has a spot for a Milwaukee ¼ hex to 3/8 square drive impact adapter.
~~Coming Soon~~
The MasterCraft/Proto Metric Shallow sockets have sizes; 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, and 19mm
The MasterCraft/Proto Metric Deep sockets have sizes; 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, and 19mm
Thank you for your time in looking at my designs, and I apologize if they do not fit your use case as they are quite specific.