1 / 9
Pretty Good Flexi Dog Lead Bag Dispenser (left/right/bottom) — zdjęcie 1
1 / 9

Pretty Good Flexi Dog Lead Bag Dispenser (left/right/bottom)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slim mount Poopy bag dispenser for Flexi retractable dog leads with left/right/bottom opening variations.

Ocena
0 / 5
Polubienia
9
Pobrania
39
Wydruki
0
Wyświetlenia
224
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Public Domain

This is a poopy bag dispenser for Flexi retractable dog leads. This unit mounts to the accessory slot below the handle. Interior dimensions are 2.5" long by 1.5" diameter. This has only been tested on the Flexi New Classic corded "S" size product as shown.

I just added two variations, "Holder L" and "Holder R", which have the bag dispense opening on the left or right respectively as you are holding the dog lead instead of at the bottom. The cover works with all three holder variations.

I tried some of the bag holder models available online, but the "slim" length mount models I found all had shortcomings. They had slot openings that went through the threads so when you screwed on the lid, it would compress the slot and the bags would bind. Attachment to the accessory mount was loose. Not that it would fall off, but it would wobble around. So I started from scratch and designed my own.

This was printed using Creality PETG filament with standard settings using my QIDI Tech Q1 Pro. I used organic/tree supports (required only for the top of the dispensing opening) and printed with the closed ends against the build plate.

This was designed using Onshape and is public. Using your free account, you can copy the design and modify it if desired or to tweak the design to fine tune the part based on your printer characteristics. Or you can just look at the methods used to create this design. The link to this design for public 3D viewing or copying is:

https://cad.onshape.com/documents/f9a7a7af3fb26fbe9c74cf7f/w/1302edf76bd4cbc574d95512/e/97b15de2c7f6df48da1084f6?renderMode=0&uiState=678a7a40fabbf243ce7b3259

UPDATE: After feedback from my brother and my wife that it falls off too easily, I added a zip-tie to secure it. It's important to position the zip-tie so the head is on the inside to prevent the part where the tail is cut off from scratching you during handling. See the photos with the red bag-holder for guidance.

This design is public and there are no restrictions on its use for any purpose, whatsoever.

Category: Pets

Tagi