Construction Screw Fastening LTT Screwdriver Holder Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use Common screws found around the house to mount your LTT Screwdriver to any surface that can accept a screw.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 2
- Wyświetlenia
- 164
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This Remix of the SBK Screwdriver Holder replaces the magnet mount with a tapered hole that accommodates most common construction screws; including Drywall, Chipboard, Woodworking, Metal self tapping, drywall anchors and Concrete Screws (if you dare to do so.)
Your fastener of choice will likely need a minimum 25mm/1" length to be secure, and must have a head no greater than 8mm/5/16" in diameter. (Disclaimer: PLEASE always use a reliable stud finder to detect metal obstructions, electrical wires, and other hidden dangers. When you believe you have found a stud, measure to ensure it isn’t a water pipe or another structure before fastening anything to the wall.)