Simple fumes extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple fumes extractor for 120mm fan and 130mm carbon filters.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Here is a simple fumes extractor for soldering. It uses a 120mm 12v fan and 130x130x10 carbon filters that are easy to find online. It has an M6 screw going out in the bottom. This makes it possible to mount it in some soldering their hands.
The required components are:
-120x120 mm 12V fan
-4xM4 screws to mount the fan (thickness of the fan + 5mm)
-12V power adaptor with output matching the fan specs.
-130x130x10 carbon filter used in popular fumes extractors.
-4x M3 heat inserts, 3x M3x8mm screws and 1x M3x 20mm screw to assemble both parts
-one M6x40 screw with a washer and nut for the mounting attachment.
-a 12V switch (the mounting hole is 28x10,5mm)
Both parts printed in PLA 0,4mm nozzle and 0,2mm layer hight, 6 perimeters (this makes it practically 100% infill). I've placed supports on the cross-sections of the grids.