1 / 3
USB-C Power Supply
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A power supply capable of outputting 0-36v, 0-6A, from input of 6-36v of a usb C PD charger
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 537
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
This is a power supply that can be used with any usb C PD charger, such as a phone charger, laptop charger or even portable battery.
* I used glue for the usb C but you can put a screw in as well.
* The hot glue line going through the middle is due to my failing printer.
The parts required for this build are:
- XY-SK120 - that is the main buck boost module of the power supply. There are other lower powered options, but its cheap enough so I got the expensive of the four. https://www.aliexpress.com/item/1005005044026039.html?spm=a2g0o.order_list.order_list_main.68.1ce01802BUTS5I#nav-specification
- 100W usb C trigger module https://www.aliexpress.com/item/1005007321092831.html?spm=a2g0o.order_list.order_list_main.72.1ce01802BUTS5I
- Banana connectors I had lying around but are easy enough to find. the diameter of their hole is 8mm
- I also added a flip switch but its now that necessary. Switch's hole diameter is 12mm
I added the STEP files as well so you can modify to your liking.
Any questions about the electronic schematic, message me on my Discoed @Asafish