Starlink Mini suction cup antenna mount with integral battery power supply

This was designed to be mounted to glass with three industrial suction cups.  It had to be robust enough for 6+ G's acceleration, and rapidly stow-able, and take up as little space as possible.  The base includes a cavity for a 4500 mAh 6S lipo battery pack with integral circuit protection (breaker) and pack monitoring (voltage indicator).  With the approximate ~40 watt draw of the Starlink Mini antenna, the system is a true stand-alone package that will enable satellite connectivity for about 2 hours.

Good for mounting into your personal T-38, or any other area with a flat, smooth surface ;)

Printed originally on a Stratasys F370, but will fit on a Prusa Mk3/4

Here is the complete bill of materials for all of the accessories used in the design

3D printed parts:

• x1 Mount (Attaches to Glass).STEP 
• x1 Mount (Attaches Starlink).STEP

McMaster Carr:

• x2 Aluminum Knurled Palm-Grip Knob 1/4"-20 Thread Size, 3" Long Stud (7762K101)
• x2 High-Strength Steel Nylon-Insert Locknut Black-Oxide, 1/4"-20 Thread Size (97135A414)
• x2 Inch-to-Inch Male-Female Hex Thread Adapter 316 Stainless Steel, 10-32 to 1/4"-20 Thread Size (91155A213)
• x2 Brass Tapered Heat-Set Inserts for Plastic 10-32 Thread Size, 0.375" Installed Length (93365A156)
• x2 Hook and Loop Cable Tie with Buckle 12" Overall Length, Black, 1" wide (3955T241-3955T348)
• x1 High-Strength Class 10.9 Steel Hex Head Screw Black Corrosion-Resistant Coated, M12x 1.75 Thread, 25mm (94863A215)
• x1 18-8 Stainless Steel Washer for M12 Screw Size, 13 mm ID, 24 mm OD (93475A290)

Amazon

• x2 3" Suction Cup
• x1 wire harness for the Starlink Mini
• x1 Lithium Battery Capacity Indicator

Other

• x1 5.5" Suction Cup 6" Vacuum Cup with 5/8" Pin (Mattews, may be available elsewhere)
• x1 4500 mAh 6S Lipo battery (Pyrodrone)
• x1 XT90 connector (Pyrodrone)
• x1 2TC2-5 Circuit Breaker (Aircraft Spruce)
• A few zip ties to constrain wiring

Design credit: Ruslan Pshichenko & Boom Supersonic